Cisco Linksys WRT54G3GV2-ST Frequently Asked Questions

How do you set up the Wireless-G Router for Mobile Broadband (model number:
WRT54G3GV2-ST)? Where do you install the Sprint Mobile Broadband Device?
How do you connect to the Router and to the mobile network?
1. Make sure your Sprint Mobile Broadband Device is activated; follow the
documentation in the Sprint Mobile Broadband Device package from your
mobile broadband provider.
. Run the Setup Wizard CD included in the Linksys Router package for
instructions on how to install the Sprint Mobile Broadband Device and how to
configure the Router.
The Setup Wizard on the CD will not automatically run when the CD is inserted in
the CD-ROM drive.
On your Windows taskbar, click Start, and select Run.
1.
. In the field provided, enter D:\SetupWizard.exe (if "D" is the letter of your CD-
ROM drive). Then click OK.
How do you connect to the mobile network?
There are three options available.
First Option Using the Front Panel Button
1. Power on the Router with the Sprint Mobile Broadband Device installed.
Press the Mobile Connect/Disconnect button on the front panel of the Router.
.
3. When it connects to the mobile network, the Internet Mobile LED will light up.
Second Option Using the Web-Based Utility
1. Open the web browser.
. Enter the Router's IP address (the default is 192.168.1.1) in the Address field.
Press Enter.
3. Complete the User name and Password fields (the default user name and
password is admin). Click OK.
On the Basic Setup screen, click the Connect button near the top of the screen.
4.
5. When the Router connects to the mobile network, the Mobile Connection line
will say, "Connected", and the Internet Mobile LED will light up.
FREQUENTLY ASKED
QUESTIONS