Iv. Appendix; Iiv-1. Configuring Your Ip Address - Edimax Gemini RE11S User Manual

IV. Appendix

IIV-1. Configuring your IP address

For first time access to the URL http://edimaxext.setup please ensure your
computer is set to use a dynamic IP address. This means your computer can
obtain an IP address automatically from a DHCP server. You can check if your
computer is set to use a dynamic IP address by following
check that your computer uses a dynamic IP address.
Static IP users can also temporarily modify your computer's IP address to be
in the same IP address subnet e.g. 192.168.9.x (x = 3 – 254) as the RE11S in
order to access http://edimaxext.setup.
The RE11S's default IP address is 192.168.9.2.
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system in
IIV-1-2. How to modify the IP address of your
Static IP users please make a note of your static IP before you
change it.
You can assign a new IP address to the device which is within the subnet of
your network during setup or using the browser based configuration interface,
so that you can access the URL http://edimaxext.setup in future without
modifying your IP address.
Please remember to change your IP address back to its original
value after the device is properly configured.
VII-1-1. How to
computer.