Progress Mode; Finish Display - Asko OP8487A Instructions For Use Manual

OPERATION

Progress mode

Finish display

EN 16
• Left side on the screen, the temperature is displayed (if the set
temperature is not reached, the temperature will switch between
cavity temp (grey) and set temp (white)). If the set temp is reached a
pop-up will appear 'set temperature is reached'.
• Right side on the screen, the time (counting down) or the progress
time (counting up if no time was set) is displayed. Next to the
cooking time you can see the finishing time.
210
°C
• If preheating is chosen, the progress mode will first show the
preheating display (preheating in the feedback bar and the
preheating icon). All settings are displayed only the colours are
switched. The cavity temperature is white and the chosen settings
are grey. If the set temperature is reached, a pop-up will appear:
'Set temperature is reached. Insert dish'.
210
°C
When the timer is finished, the 'finish display' will appear.
Now it is possible to:
• Stop the progress.
• Add extra time.
• Gratin (if possible).
• Save as favourite.
FINISH l ENJOY
Stop the progress
1. Press the confirm key.
The finish display will be closed and the standby screen will be
shown.
▷ If there is no action within 10 minutes, the display will switch to
standby mode.
HOT AIR + BOTTOM
HOT AIR + BOTTOM
14:30
0:40
15:10
14:30
0:40
15:10
14:30