Tripp Lite 200904140 Owner's Manual page 7

Features
continued
A
Mounting Brackets: Use these brackets to mount the PDU .
Mounting Buttons: Attach the included mounting buttons to the
PDU. Position the PDU as desired in the rack enclosure, align the
buttons with the rack mounting slots, and slide the PDU into
position.
Note: Regardless of configuration, the user must determine the fitness of hardware and
procedures before mounting. The PDU and included hardware are designed for common
rack and rack enclosure types and may not be appropriate for all applications.
SNMP Reset Button: Press the reset button
reboot the PDU's network card. Rebooting the network card will
not erase network settings or interrupt AC power.
A
Factory Port: The port is reserved for configuration by factory
authorized personnel only. Do not connect anything to the port.
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Contact Tripp Lite Customer
Support at 773.869.1234 for ordering information. Note: Do not
connect a keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct terminal
connection to a computer with a terminal emulation program. A
serial cable (part number 73-1025) is included with the PDU. If
you need to order a replacement cable, contact Tripp Lite
Customer Support at 773.869.1234.
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
and Status LED
in the table below. This port is not compatible with PoE (Power
Over Ethernet) applications.
B
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber
indicate several operating conditions, as shown
B
Network Operating Conditions
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
7
for 3 seconds to
A
A