Table of Contents
Advertisement
Listening to the radio
1. Select a source to tuner.
2. Select a band.
3. Auto seek.
Manual seek.
Listening to the radio - more you can do
Auto search memory
Push the button up to U U /AS. The six strongest broadcast frequencies will be
stored under preset button 1-6 in the order of their signal strength.To cancel, push
the button up to U U /AS.
Storing and recalling broadcast frequencies
1 Press BAND to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
To scan the preset stations
Push the button down to u u /PS. Each preset station appears. To cancel, push
the button down to u u /PS.
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
• When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is auto-
matically erased.
12
CAR CD/MP3/WMA Receiver
ON PLAYER
ON REMOTE
SRC
SRC
BAND
BAND
-?b / B?+
?mm/MM?
Press and hold
Press and hold
-?b / B?+
?mm/MM?
Connecting USB device(Optional)
1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.
Moving to another drive
When connecting this unit to multi reader, press BAND (BAND on remote con-
trol) to go to the next drive. Each time you press the button, the driver modes
changes.
Note
• If the USB device is already connected, press SRC (SRC on remote control.)
to select a source to USB.
• Pause / Intro Scan / Repeat / Shuffle / ... functions are same with "Listening to
a CD - more you can do". Refer to the page 11.
ON PLAYER
ON REMOTE
-
-
-
-
Rotate PWR
VOLUME
Advertisement
Table of Contents
