Walker T27i Operator's Manual page 20

Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Each End of Mower Deck
Part Number: 8600-28
1. Warning – thrown object hazard.
• Keep bystanders away from the machine
when operating.
• Clear lawn of debris before operating.
• Keep any discharge deflector in place and in
the lowest position.
2. Warning – rotating mower blades are a cutting/
dismemberment hazard to hands and feet.
• Keep all body parts away from rotating mow-
er blades.
• Do not step on end of deck.
Location: Deck Carrier Frame
Part Number: 8600-14
1. Warning – do not operate the machine with the
deck tilted up.
Location: Deck Carrier Frame
Part Number: 8600-15
1. Warning – lock deck tilt-up hinge before operat-
ing the machine.
Location: Gear Axle
Part Number: 5810-1
16
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
8600-28
1.
8600-14
1.
Location: Precleaner Tube
Part Number: 5082-5
Location: Deck Discharge Shield
(SD Decks Only)
Part Number: 5848-2
1. Warning – thrown object hazard.
• Always keep the discharge shield in the low-
est position when operating.
• Do not remove the discharge shield.
Location: Deck Gearbox Cover
Part Number: 8600-39
1. Warning - stop engine and remove ignition key
before adjusting deck cutting height.
Location: Jackshaft Support Adjacent
to Dipstick
Part Number: 7827
1.
5848-2
1.