Table of Contents
Advertisement
5.
You now have the following options: RESEND, PAUSE, CANCEL:
To RESEND the call, press RESEND soft key (AIS/IC key) to enter "HOLD DISTRESS 3
6.
SECONDS TO SEND" screen. Hold down DISTRESS key for 3s to resend the call or press
EXIT soft key (AIS/IC key) to return to waiting for an acknowledgement call.
To PAUSE the call, press PAUSE soft key (WX/NAV key) to pause the "Call repeat" mode,
7.
press EXIT soft key (AIS/IC key) to resume the same call.
To CANCEL the call, press CANCEL soft key (GO/MOB key) to enter "DISTRESS CALL
8.
SEND CANCEL" screen.
• Press NO soft key (WX/NAV key) to return to waiting for an acknowledgement call.
• Press YES soft key (AIS/IC key) to send the DISTRESS CANCEL call. Then press PTT to report
your situation using the handset mic, after the report, press EXIT to return to the normal
operating mode.
After receiving the acknowledgment, press SILENC soft key (AIS/IC key) then reply
9.
using the microphone, or press EXIT key to quit the current distress acknowledgment.
Note: Prior to receiving an acknowledgement, the distress alert call cannot immediately be
terminated by you, it can only be cancelled by completing the distress call cancel process as
described above (step 8).
8-2 Receiving a Distress Call (DISTRESS!)
DISTRESS
UNDEFINED
123456789
82°50.123'N
▼
00:01
An alert sounds when a distress call (DISTRESS!) is received.
Press SILENC soft key (AIS/IC key) to silence the alert. You do not need to send an
1.
acknowledgement.
2.
The radio automatically selects CH16 after 10 seconds if no user intervention, or press
ACCEPT soft-key (AIS/IC key) to change to CH16 immediately.
3.
Press +/- button or rotate the CH knob to view details of the distress call. Details
include the user MMSI and nature of the emergency (if specified), also the time and the
location (if specified). If the location and time are not specified, these are replaced with
sequences of 9s and 8s respectively.
• The radio is capable of receiving enhanced LL position data if the vessel transmitting the
distress call is sending this. This provides the position of the distressed vessel to within
20 m (60 ft).
4.
Press PTT to establish voice contact or press EXIT key to quit the DISTRESS RECEIVE call.
Note: The call data is stored in the Distress Log and location data (DSC & DSE) sentence will
be output on the NMEA0183 port for indication on a connected chart-plotter / MFD.
Lowrance - Link-8 Operation Instructions
59
Advertisement
Table of Contents
