Table of Contents
Advertisement
3
Operating Procedures
3.13 – AC Input Circuit Breaker
The AC input circuit breaker is located above the "Press for Capacity" button. When the circuit breaker has
been tripped, the red buttons will pop out. In the event that the breaker trips:
1. Disconnect the ac and dc connectors. (Unplug ac line cord on military unit.)
2. Wait for a minimum of 60 seconds.
3. Reset breaker by pressing red button.
4. Reconnect ac and dc connections to the unit. (Plug in ac line cord on military unit.)
The unit should power up automatically. If the breaker continues to trip, return the unit to Tesla™ Industries
for repair.
Figure 3.13.1 AC Input Circuit Breaker location
(outlined in blue)
3.14 – Universal AC Input Line Cord
Units equipped with universal ac inputs are outfitted with a cylindrical connector and a circuit breaker. Custom ac line cords
are used to plug the unit into standard 110 Vac or 240 Vac wall outlets.
Figure 3.14.1 AC Input
(outlined in blue)
Figure 3.14.2 Attaching AC Input Line Cord
TI5679 MPU-24
18
Advertisement
Table of Contents
