Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for LG 42UB829Y.AMF
Summary of Contents for LG 42UB829Y.AMF
- Page 1 OWNER’S MANUAL LED TV * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your set and retain it for future reference. UB80** UB82** UB83** www.lg.com *MFL68140543* P/NO : MFL68140543 (1408-REV00) Printed in Korea...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS LICENSES REMOTE CONTROL OPEN SOURCE SOFTWARE MAGIC REMOTE FUNCTIONS NOTICE Registering Magic Remote How to use Magic Remote Precautions to Take when Using the EXTERNAL CONTROL DEVICE Magic Remote SETUP USING THE USER GUIDE SAFETY INSTRUCTIONS - Viewing 3D Imaging MAINTENANCE... -
Page 3: Licenses
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Make sure to connect Mains cable to y Do not place the TV and/or remote control compliant AC mains socket with Grounded in the following environments: earth pin. - Page 5 SAFETY INSTRUCTIONS y Dispose of used batteries carefully y When mounting TV onto wall make sure to to ensure that a small child does not neatly install and isolate cabling from rear consume them. Please seek Doctor- of TV as to not create possibility of electric Medical Attention immediately if child shock /fire hazard.
- Page 6 SAFETY INSTRUCTIONS y Unplug the TV from AC mains wall socket if you y Do not allow any impact, shock or any do not intend to use the TV for a long period of objects to fall into the unit, and do not time.
- Page 7 SAFETY INSTRUCTIONS y If you install the TV on a stand, you need y Do not place non-rechargeable batteries to take actions to prevent the product from in charging device. overturning. Otherwise, the product may y Make sure there are no objects between fall over, which may cause injury.
- Page 8 SAFETY INSTRUCTIONS y Take care not to touch the ventilation y When cleaning the product and its openings when watching the TV for long components, unplug the power first periods as the ventilation openings may and wipe it with a soft cloth. Applying become hot.
- Page 9 SAFETY INSTRUCTIONS y Contact the service centre once a year to y You may find different brightness and clean the internal parts of the product. colour of the panel depending on your Accumulated dust can cause mechanical viewing position(left/right/top/down). failure. This phenomenon occurs due to the characteristic of the panel.
-
Page 10: Viewing 3D Imaging (Only 3D Models)
3D contents. Cautions when using the 3D glasses Symptoms which require discontinuation y Make sure to use LG 3D glasses. Otherwise, or refraining from watching 3D contents you may not be able to view 3D videos properly. y Do not watch 3D contents when you feel... -
Page 11: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. - Page 12 ASSEMBLING AND PREPARING ENERGY AV MODE INPUT ENERGY AV MODE INPUT SAVING SAVING FLASHBK FLASHBK LIST LIST MARK MARK MUTE MUTE MENU INFO Q.MENU INFO MENU Q.MENU ENTER ENTER BACK EXIT L/R SELECT BACK EXIT L/R SELECT FREEZE FREEZE RATIO RATIO Magic remote, Batteries Remote control, Batteries...
-
Page 13: Assembling And Preparing
ASSEMBLING AND PREPARING Composite gender cable Cinema 3D Glasses (See p.25) The number of 3D glasses may differ depending on the model or country. (Only UB83**) NOTE y The items supplied with your product may vary depending on the model. y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. -
Page 14: Separate Purchase
Contact your dealer to buy these items. These devices only work with certain models. AG-F***DP AG-F*** AN-MR500 Dual Play Glasses Cinema 3D Glasses Magic Remote AN-VC5** LG Audio Device Video Call Camera UB82** Compatibility UB83** UB80** AG-F***DP • Dual Play Glasses AG-F*** •... -
Page 15: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons UB80**, UB82** Screen Speakers Remote control and Intelligent sensors Joystick Button Power Indicator UB83** Screen Speakers Remote control and Joystick Button Intelligent sensors Power Indicator 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick Button - This button is located behind the TV screen. -
Page 16: Using The Joystick Button
ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions When the TV is turned off, place your finger on the joystick Power On button and press it once and release it. -
Page 17: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the Please note the following advice to prevent the TV as shown in the following illustration. TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 18: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV UB83** Image shown may differ from your TV. Attaching the stand A Stand Base UB80**, UB82** B Stand Base A Stand Base B Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. -
Page 19: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table CAUTION 1 Lift and tilt the TV into its upright position on a y When attaching the stand to the TV table. set, place the screen facing down on a - Leave a 10 cm (minimum) space from cushioned table or flat surface to protect the the wall for proper ventilation. -
Page 20: Mounting On A Wall
We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. - Page 21 If you install the TV on a ceiling or slanted Number of wall, it may fall and result in severe injury. screws Use an authorised LG wall mount and LSW240B LSW440B Wall mount contact the local dealer or qualified...
-
Page 22: Tidying Cables
ASSEMBLING AND PREPARING / MAKING CONNECTIONS MAKING CONNECTIONS Tidying cables Image shown may differ from your TV. This section on MAKING CONNECTIONS 1 Gather and bind the cables with the cable mainly uses diagrams for the 42UB82** models. holder. 2 Fix the Cable Management firmly to the TV. Connect various external devices to the TV and switch input modes to select an external device. -
Page 23: Antenna Connection
MAKING CONNECTIONS Antenna connection HDMI connection Connect the TV to a wall antenna socket with an Transmits the digital video and audio signals RF cable (75 Ω). from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. -
Page 24: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI connection 4K @ 50/60 Hz Support Format Frame Colour Depth/ Resolution Transmits the digital video signal from an rate(Hz) Chroma Sampling external device to the TV. Connect the external 3840 x 2160p 50.00 device and the TV with the DVI-HDMI cable as 4096 x 2160p 59.94 8 bit / YCbCr 4:2:0... -
Page 25: Component Connection
MAKING CONNECTIONS Component connection Composite connection Transmits analog video and audio signals Transmits analog video and audio signals from an external device to the TV. Connect the from an external device to the TV. Connect the external device and the TV with the composite external device and the TV with a component cable as shown. -
Page 26: Audio Connection
MAKING CONNECTIONS Audio connection Headphone connection You may use an optional external audio system Transmits the headphone signal from the TV to an external device. Connect the external device instead of the built-in speaker. and the TV with the headphone as shown. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. -
Page 27: Usb Connection
MAKING CONNECTIONS USB connection MHL connection Connect a USB storage device such as a USB Mobile High-definition Link (MHL) is an interface flash memory, external hard drive, or a USB for transmitting digital audiovisual signals from memory card reader to the TV and access the mobile phones to television sets. -
Page 28: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. -
Page 29: Magic Remote Functions
MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. -
Page 30: Registering Magic Remote
MAGIC REMOTE FUNCTIONS How to use Magic Remote Voice recognition (Depending on model) Network connection is required to use the y Shake the Magic Remote voice recognition function. slightly to the right and left 1 Press the Voice recognition button. or press (Home), 2 Speak when the voice display window... -
Page 31: Precautions To Take When Using The Magic Remote
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE USING THE USER GUIDE Precautions to Take when Using the Magic Remote y Use the Magic Remote within the User Guide allows you to more easily access the maximum communication distance (10 detailed TV information. -
Page 32: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 33: Specifications
SPECIFICATIONS SPECIFICATIONS Wireless module(LGSBW41)Specifications Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0 2400 to 2483.5MHz Frequency ragne 5150 to 5250 MHz Frequency ragne 2400 to 2483.5MHz 5725 to 5850 MHz (for Non EU) 802.11a: 13 dBm 802.11b: 15 dBm Output Output 802.11g: 14 dBm... - Page 34 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 40UB80** 42UB82** 49UB82** MODELS 40UB800T-TB 42UB820T-TH 49UB820T-TH 40UB809Y-TB 42UB829Y-TH 49UB829Y-TH Dimensions With stand (mm) 900 x 568 x 217...
- Page 35 SPECIFICATIONS Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV Analogue TV (Depending on Country) (Depending on Country) PAL B/B, PAL B/G, PAL D/K, PAL-I Television System DVB-T(*DVB-T/T2) SECAM B/G, SECAM D/K...
- Page 36 Record the model number and serial (Only DTV) number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
- Page 37 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
- Page 38 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
- Page 39 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 40 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
- Page 41 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 42 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 43 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 44 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 45 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 46 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 47 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 48 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...