Output Screen - Panasonic Micro SD AW-HN40HWPC Operating Instructions Manual

Camera menu items
■

Output screen

### Output ###
Format
Frequency
Priority Mode
Return
Format
For 59.94Hz:
[Auto, 1080/59.94p, 1080/59.94i,
1080/29.97PsF, 1080/29.97p, 720/59.94p]
For 50Hz:
[Auto, 1080/50p, 1080/50i, 1080/25PsF,
1080/25p, 720/50p]
The video format is changed on this screen.
For details on how to change the format, refer to
"Changing the format" (page 45).
Note
● When "Auto" is selected, the unit automatically
determines the output video resolution based on
information from the connected device.
If the proper resolution is not displayed when "Auto"
is selected, switch to a video format other than
"Auto".
Frequency [59.94Hz, 50Hz]
This item is selected to switch the frame frequency.
● When the frequency is switched, "Format" is set as
follows.
59.94Hz
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
● For details on how to change the frequency, see
"Changing the frequency" (page 45).
Note
● If you change the frequency, the unit will restart
automatically. Operation will not be possible while
the unit is restarting.
Some peripheral devices may not recognize that the
unit has restarted. If you change the frequency, be
sure to restart all peripheral devices.
44
(continued)
1080/59.94i
59.94Hz
IP
50Hz
 1080/50p
 1080/50i
1080/25PsF

 1080/25p
 720/50p
Priority Mode [IP, SD card, USB, NDI|HX]
Configure the setting for the priority output of video.
IP:
Enables IP image transmission over multiple channels.
The IP transmission of H.264 images is also supported.
SD card:
Inserting an SD card (optional accessory) into the unit
enables recording H.264 images to the SD card.
The data recorded to the SD card can be played
back on the Web screen, downloaded to a personal
computer, and transferred to an FTP server.
USB:
Enables the unit to be used as a Web camera.
The camera can also be controlled from a personal
computer.
NDI|HX:
Transmits video to NewTek NDI compatible software
applications and hardware devices over a network.
The function supports H.264/IP transmission using
NDI|HX.
Note
● The "IP" mode and "SD card" mode require various
settings to be configured from a personal computer
connected via the network.
Priority mode change confirmation screen
### Priority Mode ###
Are you O.K.?
No
Yes
● If you move the cursor to "Yes" and confirm, the priority
mode is changed and the display returns to the Output
screen.
● If you move the cursor to "No" and confirm, the mode is
set to the pre-change mode, and the display returns to
the Output screen.
Return
Use this to return to the previous menu.