When Writing Or Rewriting - Toshiba Qosmio G20 User Manual

When writing or rewriting

Please observe/consider the following when you write or rewrite to a
CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
Do not perform any of the following actions when writing or rewriting:
Do not use shut down/log off and standby/hibernation while writing or
rewriting.
Make sure writing or rewriting is completed before going into
standby/hibernation. Writing is completed if you can open the DVD
Super Multi drive tray.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Always copy data from the hard disk drive to the optical media. Do not
use cut-and-paste. The original data will be lost if there is a write error.
User's Manual
Change users in the Windows XP operating system.
Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including the following:
PC card, SD card, ExpressCard, Memory Stick/Memory Stick Pro,
xD picture card, MultiMediaCard, USB devices, external monitor,
i.LINK devices, optical digital devices.
Use the Audio/Video control button to reproduce music or voice.
Open the optical media drive.
Operating Basics
4-11