Life Smart LS-8WIQH-LB Manual page 14

OPERATING INSTRUCTIONS
4 . To set the timer to power off the heater, start
the unit and press the Timer button on the
control panel (C) or remote control (B) .
Note: The timer-power-off function can only be
set when the heater is in power-on mode .
The digital display on the control panel (C)
changes from the set temperature readout
to a time value for the timer . Press the Timer
button repeatedly to change the number value
between a range of 0 to 12 hours (in 1-hour
intervals) .
The Timer light turns on when the timer is set .
5 . To set the timer to power on the heater, first
ensure the unit is powered off, then press the
timer button on the control panel (C) .
Note: The timer-power-on function can only be
set when the heater is in power-off mode .
The digital display on the control panel (C) will
indicate time value for the timer . Press the
Timer button repeatedly to change the number
value between a range of 0 to 12 hours (in
1-hour intervals) .
The Timer light turns on when the timer is set .
6 . To replace the batteries, remove the battery
cover (1) from the remote (B) by applying
pressure to the battery cover (1) and sliding
it away from the remote (B) . Insert two AAA
batteries (not included) (2) and close the
remote by placing the battery cover (1) back on
the remote (B) .'
Note: Do not mix old and new batteries . Do
not mix alkaline, standard (carbon-zinc),
or rechargeable (NiCad, Ni-Mh, etc)
batteries .
4
C
5
C
6
1
B
14
B
TIMER
B
TIMER
2