Control Panel - Schumacher Electric SP1295 Owner's Manual

Automatic battery charger
Table of Contents

Advertisement

Available languages

Available languages

8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
9.
ASSEMBLY INSTRUCTIONS
9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
10. FEATURES

11. CONTROL PANEL

LED INDICATORS
POWER (red) LED lit: There is AC power supplied to the battery charger.
CHARGING (yellow/orange) LED lit: The charger is charging the battery.
CHARGING (yellow/orange) LED flashing: The charger has detected
a problem with the battery.
CHARGED (green) LED pulsing: The battery is fully charged and the
charger is in maintain mode.
25
50
100
18
18
18
1
2
3
4
• 6 •
150
16
1. LED indicators
2. Battery clamp quick-connect
3. Ring terminal quick-connect
4. Quick-connect connector

Advertisement

Table of Contents
loading

Table of Contents