Yamaha SILENT Bass SVB-100 Owner's Manual page 8

• The strings are tuned to the following pitches. The 1st
string is tuned to G, the 2nd string to D, the 3rd string
to A, and the 4th string to E.
Use a piano, tuning fork, tuner, etc., and adjust the
pitch of each string using the tuning pegs.
• After tuning is complete, make sure that the tailpiece
side of the bridge is still properly aligned. If the
bridge is leaning in either direction, slightly loosen
the strings and carefully re-align the bridge using both
hands.
Caution
Make sure that the Tail Wire is correctly positioned
on top of the Saddle.
● Tuning machine tension adjustment
The tuning machine's tension that regulates the amount of pressure
required to turn the tuners can be adjusted using the supplied Allen
wrench.
* If the tuning machine turns with very slight pressure
→ Rotate the adjustment screw to the right (clockwise: A).
* If the tension is tight and the tuning machine is hard to turn
→ Rotate the adjustment screw to the left (counter-clockwise: B).
8
Raise
pitch
Lower
pitch
2nd string (D)
1st string (G)
3rd string (A)
4th string (E)
Saddle
Tall wire
B
A