Installation Orientation; Mounting - Newland EM50S-10 Integration Manual

Installation Orientation

The Figure 2-1 illustrates a front view of the EM50S after correct installation.

Mounting

The EM50S series include two models -- EM50S-10 and EM50S-20 -- to cater for different mounting needs.
For the EM50S-10 (the decoder board and the imager already assembled as one), the user can just mount the assembled
unit on the target device.
For the EM50S-20, the user can mount the decoder board and the imager separately and connect them with an FFC cable.
The illustrations below show the mechanical mounting dimensions for the EM50S-10 and EM50S-20. The structural design
should leave some space between components and reserve sufficient room for the installation of the FFC cable.
7
Figure 2-1