Inserting The Battery - Remington Power Pro Use & Care Manual

Table of Contents

Advertisement

INSERTING THE BATTERY

Your Remington
®
ALKALINE battery, which are included in your pack.
1.
To open the battery compartment, turn the base of the unit approximately
1cm clockwise (to the right) and pull it off.
2.
Insert the battery into the unit, positive end first.
3.
Replace the base and turn it 1cm anti-clockwise (to the left) to lock it in place.
BATTERY CAUTIONS
Using non-alkaline batteries will impair the unit's operating performance.
The battery should not be left in the unit if it is not in use for long periods.
To prevent battery corrosion, the unit should be stored in a dry environment.
Dead batteries should be removed immediately and disposed of properly.
Do not use rechargeable batteries with this appliance. The lower voltage in
rechargeable batteries impairs the performance of the cutting unit.
HOW TO USE
To remove hair from the nose
1.
Select the nose & ear trimmer.
2.
Turn the trimmer on.
3.
Insert the trimmer's cutting unit gently into the nostril.
4.
Rotate the trimmer in a circular motion around the opening of the nostril.
5.
For best cutting efficiency, gently move trimmer in and out of the nostril as
you rotate the trimmer.
6.
Do not insert the trimmer more than 6mm into your nostril.
NOTE: Always remember to turn on the trimmer before you insert it into your
nose or ear to avoid painfully snagging hairs.
To remove hair from the ear
1.
Select the nose & ear trimmer.
2.
Turn the trimmer on.
3.
Insert the trimmer's cutting unit gently into the outer ear canal opening.
4.
Gently rotate the trimmer in a circular motion.
5.
To trim hairs protruding from the surface of the area surrounding the outer ear
canal, guide the trimmer around the edge of the ear.
6.
Avoid inserting the trimmer more than 6mm into your ear canal.
Power Pro Grooming Kit trimmers are each powered by one "AA"
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc9000au

Table of Contents