Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
2
Press
on the main unit to start
installation.
[AUTO] (auto) is displayed.
»
»
The unit automatically stores radio
stations with sufficient signal strength.
»
When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
Set clock
1
In the standby mode, press DISPLAY/
CLOCK to activate the clock setting
mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press ALB/PRESET+/- repeatedly to
select 12 hour or 24 hour format.
3
Press DISPLAY/CLOCK to confirm.
»
The clock digits are displayed and
begin to blink.
4
Press ALB/PRESET+/- to set the hour.
5
Press / to set the minute.
6
Press DISPLAY/CLOCK to confirm.
Tip
•
To view the clock during play, press
CLOCK.
Turn on
1
Switch to standby
1
DISPLAY/
Press POWER.
»
The unit switches to the last selected
source.
Press
to switch the unit to standby
mode.
The backlight on the display panel is
»
dimmed.
The clock (if set) appears on the
»
display panel.
EN
13