Need Help; Fcc Compliancy - Philips SRP2104/27 User Manual

After setup, not all buttons work al expected.
• T ry improving the button(s). See chapter
2.2.2.
How do I set the remote control for combo
devices (TV / VCR, TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two
different source selection buttons to control
both parts of the combo device. For example,
if you have a TV / DVD combo, you might need
to set up the remote control for both TV and
DVD to operate your TV / DVD combo.
4.1.2 Operation
The remote control does not wake up
anymore.
Battery level too low or battery lifetime came
to an end.
• R eplace the batteries. For this see chapter
2.1. After replacing the batteries, test if the
remote control still operates your devices. If
it does not, you have to set up the remote
control again. For this refer to chapter 2.2.
The device I want to operate does not respond
at all / does not respond to all of the button
commands.
• C heck if the buttons you press are available
on the original remote control of the device.
• T ry improving buttons. See chapter 2.2.2.
Wrong code selected during setup.
• S et up the remote control again for the
device. Always test if the device responds,
before leaving setup mode.
It may be that the buttons that you are trying
to use have a different naming on the original
remote control.
• T ry out all buttons to find the one(s) you
need.
12 EN
4.1.3 Batteries
Will my settings be deleted when I replace the
batteries?
No. All user settings will be retained in the
remote control memory in the remote control
memory for 5 minutes.
Warning
The batteries should not be exposed to
excessive heat such as sunshine, fire or the
like.
4.2 Need help?
We advise you to first read this user manual
carefully. It is provided to help you set up and
use the remote control.
If, however, you require extra information or
have additional questions about setup, usage,
spare parts, warranty, etc. of the SRP2104, you
can always contact us.
When calling our helpline, make sure to have
the SRP2104 at hand when you call, so that our
operators can help you determine whether the
SRP2104 is working properly.
You will find our contact details at the end of this
user manual.
The model number of your Philips universal
remote control is SRP2104/27.
Date of purchase:
......../ ......../ ........
(day/month/year)
For online support go to: www.philips.com/
welcome.
• C lick 'Support' and follow the on-screen
instructions.
FCC Compliancy
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• T his device must accept any interference
received, including interference that may cause
undesired operation.
EN 13