Sylvania Nostalgia SRCD838BT Instruction Manual page 16

AUX IN:
1. Connected the external audio device to the unit by an audio
~ Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device.
~ Insert the other end to the AUX IN jack on the front of unit.
3
2. Turn the Power ON/OFF - VOLUME knob clockwise until a "click" sound was heard to turn on the unit.
3. Turn the Function selector to the TAPE/AUX
4. Play the music on the connected external audio device as usual.
5. When finished listening, turn the Power ON/OFF - VOLUME knob
heard to power off the unit.
Notes:
Make sure the sound output level of the connected external audio device is in high level.
LINE OUT:
1. Connected the external audio device by an audio connection
~ Insert one end to the Line IN or AUX IN jacks on the external audio Amplifier.
~ Insert the other end to the LINE OUT jacks on the rear of unit.
Others Connection
connection cable with 3.5mm stereo mini jacks
2 5
VOLUME
AUX IN
1
position.
cable with RCA plugs
AC~120V 60Hz
(Connection Cable not included)
15
......................................
Mobile Phone
Connect to the Phones;
AUX Out; Line Out Jack
of external audio devices
(Such like MP3 Player;
cell phone; iPod/iPad ... etc)
......................................
To AUX IN Jac
on the unit
counterclockwise until a "click" sound was
To the Line In/AUX In
jacks on the external
audio Amplifier
k