Sylvania Nostalgia SRCD838BT Instruction Manual page 15

1
Turn the Power ON/OFF-VOLUME knob clockwise until a
"
"
click sound was heard to turn on the unit.
VOLUME
2
Turn the Function selector to the TAPE/AUX
3
Insert a pre-recorded cassette tape into the cassette
compartment until the Eject button ejected.
Play will start automatically.
Listening to a Cassette Tape
2
，
4
Turn the Power ON/OFF-VOLUME knob to adjust
volume level.
5
Fast forward
position.
To fast foreword to desired point, press the Eject button to
half position. When finished, press the button again to
resume normal playback.
Note: When finish winding, please remember press the Eject
button to stop winding and take out the tape. Otherwise, the
unit will maintains on the winding mode.
6
To stop playback and eject the tape
When finished listening, press the Eject button to stop
playback and take out the tape. Turn the Power ON/OFF
-VOLUME button counterclockwise until a "Click" sound
was heard to power off the unit.
NOTE: During playing, DO NOT plug the AUX IN cable,
14
1 4
VOLUME
AUX IN
VOLUME
or it will switch to AUX IN mode.