Sylvania Nostalgia SRCD838BT Instruction Manual page 19

If you experience any problems with the unit, please take a monent to look through this chart and see if you can
solve the problem yourself before you call your dealer.
No power
Check the connection of AC wall outlet.
No sound.
Rising the volume level by turn the Power ON/OFF - VOLUME
Noisy sound:
The unit is too close to a TV set or similar appliances.
Relocate the unit.
Radio:
Can not listen to any station, or signal is too weak.
Tune the station properly.
The Function selector is in wrong position, turn it to
Relocation the unit.
Turntable:
Not playing or sound distortion
The Function selector is in wrong position, turn it to PHONO position.
Loosen the screw, and take out the stylus guard.
(The stylus guard is a white plastic cover that protects the stylus during transportation.)
Select the correct playback speed.
CD Player
Not playing
The Function selector is in wrong position, turn to CD position.
Load the disc with the label side face up.
If the disc is dirty, clean the surface of the disc.
Try again wth another disc.
Cassette Tape Player
The tape has not insert completely. Insert the tape tightly until the Eject button is ejected.
The Function selector is in wrong position, turn it to TAPE/AUX
Bluetooth
Not playing
The Function selector is in wrong position, turn it to TAPE/AUX
The external BT device had NOT paired to the unit
The external BT device too far from the unit
Sound is distorted or noisy
Clean and demagnetize the heads.
If the unit is halt or abnormal operation, unplug the power cord from the wall outlet and plug it again.
Maintenance:
Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft cloth or
liquid soap. Be sure to remove any excess
damage the surface of the unit. Allow the surface
Troubleshooting
RADIO position.
Not playing
liquid completely. Do not use thinner, benzine or alcohol as
of the unit to dry completely before using.
18
knob clockwise.
position.
position.
use a diluted mild
they may