AT&T CL80107 User Manual page 13

Getting started
Battery installation and charging
After you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time.
After that, it will prompt if you want to set up
Smart call blocker* and the answering system via
voice guides (only for CL82107/CL82207/CL82307/
CL82357/CL82407/CL82507 telephone system).
Press /SELECT to start when prompted. For
MENU
details, see the corresponding sections in the
telephone system's user's manual. To skip these
settings, press
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342). To order, visit our website at
www.telephones.att.com
In Canada, dial
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
* Includes licenced Qaltel
Qaltel is a trademark of Truecall Group Limited.
TM
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow
the instructions to install and charge a
new battery.
/CANCEL.
OFF
1 (866) 288-4268
technology.
TM
1 (800) 222-3111
or call
.
9
SET DATE
MM/DD/YY
fffff
SET TIME
HH:MM --
fffff
Setup Ans sys?
fffff
.