D-Link Air DWL-650 Manual page 9

Getting Started (continued)
Setting up a Wireless Infrastructure Network
Please remember that D-Link Air wireless devices are pre-configured to connect
together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the
following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
Install the D-Link Air DWL-520 wireless PCI adapter into an available PCI slot
on your desktop computer.
(See the Quick Installation Guide included with the DWL-520.)
Install the D-Link Air DWL-650 wireless PC Card adapter into a laptop computer.
(See the Quick Installation Guide included with the DWL-650.)
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-530TX+) to the router also.
2
3
6
5
1
4
9