Unitech MS340BT User Manual

Bt ccd scanner

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

BT CCD Scanner

- FCC ID: HLEMS340BT -

sUser's Manual

Version 1.1

unitech is a registered trademark of unitech Electronics Co., Ltd

Table of Contents

Need help?

Do you have a question about the MS340BT and is the answer not in the manual?

Questions and answers

Summary of Contents for Unitech MS340BT

Page 2 Change Log. Date Change Description Version 2016/1/11 first published version 2016/1/22 Add 1.4.2 Installing the battery © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd...
Page 3: Preface
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 4 This Class B Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 5 European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the R&TTE 1999/5/EC directive, the EMC 2004/108/EC directive and the Low Voltage 2006/95/EC directive. The declaration of conformity is available for download at : https://portal.unitech.eu/public/Safetyregulatorystatement...
Page 6 Taiwan NCC Warning Statement 交通部電信總局低功率電波輻射性電機管理辦法第十二條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。注意事項: 1. 使用過度恐傷害視力。 2. 使用30分鐘請休息10分鐘；2歲以下幼兒不看螢幕，2歲以上每天看螢幕不要超過 1小時。 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 7 Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations.
Page 8 It may not be functional anymore. Please only use the original battery from unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by unitech’s warranty policy...
Page 9 Please follow the limitation of suggested temperature conditions to avoid failure, damage or malfunction. *For applicable temperature conditions, please refer to the specification of each product. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 10 Please remove the power adapter when the battery is fully recharged. The bundled power adapter that comes with your unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product.
Page 11 Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan –...
Page 12 The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user.
Page 13: Table Of Contents
3.6 Industrial 25 Parameters ..............23 3.7 Matrix 25 Parameters ................24 3.8 CODABAR/NW7 Parameters ...............25 3.9 Code 93 Parameters ................27 3.10 Code 11 Parameters................28 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 14 4.11 PAN Configuration ................52 Appendix A –Numeric Bar Codes............55 Appendix B –ASCII Table...............56 Appendix C –Function Key Table............60 Appendix D–Numeric Bar Codes2............61 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 15: Regulatory Compliance Statements
Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the MS340B gift box. If something is missing or damaged, please contact your unitech representative. The standard package contents:  MS340B Scanner  Quick Start Guide ...
Page 16: Scanner & Cradle Detail
1.2 Scanner & Cradle Detail Scanner LED indicator Scan Window Trigger Cradle Cradle LED indicator Cable connector © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 17: Specifications
Communication Radio Frequency Bluetooth V2.1 EDR, (smaller 10mW) Frequency Band 2.402GHz~2.480 GHz Transmission Range Up to 100m (328.08 FT.) line of sight © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 18 0°C to 50°C Temperature Storage Temperature -20°C to 70°C Relative Humidity 20% to 95% non-condensing Regulation Approvals CE, FCC, BSMI, VCCI, NCC, TELEC © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 20: Getting Started
3) When scanner is successful connected, the scanner blue LED will also blink with up-tone. Blue LED will slowly flash to finish the setup. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 21 When scanner is successful connected, scanner blue LED will also blink with up-tone. Blue LED will slowly flash to finish the setup. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 22 3. Replace the battery cover and use the screwdriver to tighten the screw on the bottom of the scanner. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 23 2. Use a bended regular paperclip and insert the tip into the hole. 3. You will hear a "click", then gently pull out the strain-relief of the cable. Pin-hole © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 24: Battery Charging
3. Place the scanner in the cradle. The scanner LED Scanner LED indicator will be red to indicate charging and turn green when it is fully charged. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 25: Led Indicator / Beeper Sequence
Green light blinks once No action Start charging Solid red light Blue light blinks once No action Battery changed then green light blinks twice © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 26 & Communication Good read and transmitted Green light blinks once BT disconnect (continuously) Blue light blinks twice BT connected Solid blue light © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 27: Chapter 2 - Configuration-General
Chapter 2 – Configuration-General 2.1 Flow Chart *Please scan the following barcodes for configuration Start Configuration End Configuration Abort Configuration Save Parameters © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 28: Loop Of Programming
By scanning “Set All Default” label, the settings will go back to the factory default settings. ( Please refer to – Main Page of Configuration) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 29: Main Page Of Configuration
Set AII Defaults - Set all the parameters to the factory default settings. Abort Configuration - Terminate current programming status. Version Information - Display the decoder version information and date code. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 30: Chapter 3 -Bar Codes & Others
Code 2 of 6 ON Code 2 of 6 OFF * Interleave 25 ON * Interleave 25 OFF LCD25 ON LCD25 OFF * © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 31 Reserved5 ON Reserved5 OFF * GS1 DataBar Expanded OFF * GS1 DataBar Reserved6 ON Reserved6 OFF * Expanded ON Select All Bar Codes © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 32: Upc/Ean/Jan Parameters
Supplement Supplement * Expand UPC-E Expand UPC-E Disable * Enable EAN8=EAN13 EAN8=EAN13 Disable * Enable GTIN Format GTIN Format Enable Disable * © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 33 EAN-13 Check Digit Transmission ON * EAN-13 Check Digit Transmission OFF ISSN Check Digit Transmission ON * ISSN Check Digit Transmission OFF © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 34: Code 39 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 35: Code 128 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 36: Interleave 25 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 37: Industrial 25 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 38: Matrix 25 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 39: Codabar/Nw7 Parameters
A/B/C/D Start * A/B/C/D Stop * A Start A Stop B Start B Stop C Start C Stop D Start D Stop © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 40 Set Begin 3. 2 Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 41: Code 93 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 42: Code 11 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 43: Msi/Plessey Code Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 44: Code 2 Of 6 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 45: Lcd25 Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 46: Telepen Parameters
3. 2 Set Complete 2. Numeric Bar Codes (Appendix A) Minimum Length 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 47: Gs1 Databar
Symbology ID * Symbology ID Symbology ID * Transmit Symbology C. GS1 DataBar Expanded Parameters Don’t Transmit Symbology ID * Transmit Symbology ID © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 48: Bar Code Id
CODE 11 China Postage MSI / PLESSEY Code 2 of 6 LCD 25 Telepen GS1 DataBar Omnidirectional GS1 DataBar GS1 DataBar Limited Expanded © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 49 CODE 128 CODE 39 CODABAR/NW7 Interleave 25 Industrial 25 Matrix 25 CODE 93 CODE 11 ChinaPostage MSI/PLESSEY Code 2 of 6 Telepen © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 50 LCD25 GS1 DataBar Omnidirectional ON GS1 DataBar Limited ON GS1 DataBar Expanded ON Reserved5 Reserved6 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 51: Chapter 4 - Command Setting
Virtual COM 4.1.2 Reading Mode Selection Trigger ON/OFF * Good Read OFF Continuous/Trigger OFF Testing Continuous/Auto Power On Flash Flash/Auto Power On Presentation © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 52 When enabling iOS Hotkey, you may simply double-click the trigger to toggle the iPhone/iPad Touch Keyboard. Note: This function is only available for iPhone/iPad. Enable Disable* © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 53: Communication Parameters
C. Set Up Stop Bits 9600 * 8 Data Bits * 1 Bit* 1200 7 Data Bits 2 Bits 2400 4800 19200 38400 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 54 E. Handshaking None * RTS/CTS Disable * RTS/CTS Enable Even ACK/NAK Disable * ACK/NAK Enable XON/XOFF Disable * XON/XOFF Enable Mark Space © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 55 0 ms * None 5 ms CR +LF 10 ms 25 ms Space 50 ms HT(TAB) 100 ms STX-ETX 200 ms 300 ms © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 56: Language Selection
4.3 Language Selection US English * Hungarian UK English Janpanese Italian Belgium Spanish Portuguese French Denmark German Netherlands Swedish Turkey Switzerland Reserved 2 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 57: Reading Level
The Polarity can be sent as standard with black bars high, or reversed with white bars high. Black Bars High * White Bars High © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 58: Accuracy
Note: It will cause the scanning process to slow down by choosing more than 1 time to verify the data. 1 Time * 2 Times 3 Times 4 Times 4.6 Buzzer Beep Tone High * Medium © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 59: Sensitivity Of Continuous Reading Mode
3. Scan the "Complete" label Repeat the steps 1-3 to set time out of same symbol 1. Begin 3. Complete 2. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 60: Reverse Output Characters
6. Scan the “Complete” label of “Number of Characters to be Deleted”. Repeat the steps 1 – 6 to set additional deletion. A. Select Deletion Set Number © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 61 MSI/PLESSEY CODABAR/NW7 Code 2 of 6 Interleave 25 Telepen LCD25 GS1 DataBar Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded None All Codes © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 62 2. Complete 1. Numeric Bar Codes (Appendix A) D. Number of Characters to be Deleted 2. Complete 1. Numeric Bar Codes (Appendix A) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 63: Setup Insertion
6. Scan the “Complete” label of “Characters to be inserted”. Repeat the steps 1 – 6 to set additional insertion. A. Select Insertion Set Number © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 64 MSI/PLESSEY CODABAR/NW7 Code 2 of 6 Interleave 25 Telepen LCD25 GS1 DataBar Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded None All Codes © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 65 C. Character Position to be Inserted 2. Complete 1. Numeric Bar Codes (Appendix A) D. Characters to be Inserted 2. Complete 1. ASCII Table (Appendix B) © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 66: Pan Configuration
The communication with cradle or Bluetooth device will be reconnected. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 67 Batch Data Clear ** ** : Quick Setting Label The function can be executed directly by scanning barcode instead of doing the general programming process. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...
Page 68 Scanner MAC Address** Cradle MAC Address** ** : Quick Setting Label Display the firmware version of the scanner, please scan above barcode. © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co.,Ltd...

Unitech MS340BT User Manual

Chapter 1 - Overview

Chapter 2 - Configuration-General

Chapter 3 -Bar Codes & Others

Chapter 4 - Command Setting

Appendix A -Numeric Bar Codes

Appendix B -ASCII Table

Appendix C -Function Key Table

Appendix D-Numeric Bar Codes2

Quick Links

Need help?

Questions and answers

Related Manuals for Unitech MS340BT

Summary of Contents for Unitech MS340BT

Table of Contents