Format A New Memory Card; Activate The Digital Recorder - Philips LFH0955/12 User Manual

To insert a memory card:
Locate the memory card slot on the top
1
back side of the digital recorder.
Slide the memory card into the slot. A small
2
illustration under the memory card slot
indicates the correct orientation.
Push the memory card in until you hear a
3
click.
D Note
If the digital recorder is turned to the
position and there is no memory card inserted,
a warning screen is displayed.
The memory card that is packaged with the
digital recorder is already formatted and ready
for use. If a memory card is inserted that is not
formatted, the digital recorder will offer the
option to format it. Refer to the next chapter
for more information.
3.6

Format a new memory card

When a new, unformatted memory card (or a
memory card that was formatted with a non-
digital recorder device) is inserted, the digital
recorder will display a prompt to format the
memory card.
A
To confirm and start the formatting process,
1
press the smart button
OK
To cancel the formatting process, remove
2
the memory card or press the
smart button .
2
10
2
The digital recorder will be unable to record
without a properly formatted memory card.
ON
If a new card was inserted and the formatting
process was cancelled, insert another card that
can be formatted or has already been formatted.
D Note
Formatting is not possible if the memory card is
in read-only mode (locked).
3.7
The digital recorder is turned on and off by
sliding the
the first time, you will be prompted to set the
language, date and time.
.
1
CANCEL
Delete all ?
A
Format memory
Delete all ? Yes - format
Volume
All files
Font
will be lost !
Language
BACK ENTER BACK

Activate the digital recorder

switch. When using it for
ON/OFF
D e l e t
B
e a l l
?
Y e s -
C
f o r m a
t
! ! A T T
E N T I
O N !
!
O K
C A N C
E L
ENTER
User manual
1
2