Table of Contents
Advertisement
Item
Operation flow and applicable data, etc.
([Hi-POWER] button on the remote controller is
11. Hi-POWER
Mode
pressed)
When [Hi-POWER] button is pressed while the indoor
unit is in Auto or cooling operation, Hi-POWER mark
is indicated on the display of the remote controller and
the unit operates as follows.
1. Automatic operation
• The indoor unit operates in according to the
current operation.
2. Cooling operation
• The preset temperature drops 1ºC
(The value of the preset temperature on the
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap.
3. The Hi-POWER mode can not be set in Dry
operation
12. Display lamp
To decrease the display lamp brightness or turn it off.
brightness
adjustment
1.
2. . Pre
Remote control
LCD
● In the examples of
going off.
FAN
Press and hold
or
) is shown on remote control LCD then release the button.
or
Rise
Decrease
Lamp illuminates full brightness.
Lamp illuminates 50% brightness.
Lamp illuminates 50% brightness and the
operation lamp is turned off.
All lamps are turned off.
and
for 3 seconds until brightness level (
to adjust brightness in 4 levels.
Operation display
, the lamp illuminates for 5 seconds before
- 32 -
Description
,
,
Brightness
100%
50%
50%
All turned off
Advertisement
Chapters
Table of Contents
