Do you have a question about the 8-CT and is the answer not in the manual?
Questions and answers
Richard William Hawkins
February 15, 2025
how to remove the shrowd
1 comments:
Mr. Anderson
May 14, 2025
To remove the shroud on a Star Trac 8-CT:
1. Remove the motor shroud carefully without modifying the equipment. 2. Save any screws removed for reassembly. 3. If removing the PVS (Personal Viewing Screen) shroud, use a #2 Phillips screwdriver to remove the eight (8) screws securing the PVS rear shroud, then remove the PVS shroud.
Always disconnect all power before performing maintenance or cleaning.
PRODUCT SPOTLIGHT MANUFACTURER: PRODUCT SPECIFICATIONS 8-CT CORE HEALTH & FITNESS Dimensions: 30”W x 76”L x 72”H 4400 NE 77th Avenue, Suite 300 66cm x 193cm x 183cm Vancouver, WA 98662 Weight: 456 lbs/207 kg Telephone: (888) 678-2476 http://www.corehealthandfitness.com CUSTOMER SUPPORT: CORE HEALTH &...
Read all warnings posted on the machine. Health related injuries may result from incorrect or excessive use of exercise equipment. STAR TRAC strongly recommends you to encourage your members to discuss their health program or fitness regimen with a health care professional, especially if you or they have not exercised for several years, are over 35, or have known health conditions.
Page 5
4. Keep power cord away from heated surfaces. Unplug power cord when the machine is unattended and before performing any preventative maintenance such as cleaning or replacing a worn part. 5. Familiarize yourself with the location of the STOP buttons on the console. If you experience difficulties during the workout, pushing the STOP button will bring the machine to a stop.
Page 6
SAFETY INSTRUCTIONS This chapter includes precautions and fitness safeguards for the installation and use of the product. Please read this chapter carefully before installing or using your equipment. Safety instructions are provided in the following languages (in the order shown): English •...
Page 7
PRECAUTIONS CAUTION: READ THE OWNER’S CAUTION: MOVING PARTS, KEEP MANUAL COMPLETELY BEFORE HANDS AND FEET FROM UNDER OPERATING THIS MACHINE. THE TREADMILL WHEN OPERATING. CAUTION: BEFORE CLEANING OR SERVICING, DISCONNECT POWER STOP (OF ACTIVITY) SUPPLY. These safety notes are directed to you as the owner of the equipment. For safety purposes, it is your responsibility to train all your members and fitness staff to follow these safety instructions.
Page 8
VOORZORGSMAATREGELEN WAARSCHUWING: LEES DE WAARSCHUWING: BEWEGENDE GEBRUIKERSHANDLEIDING ONDERDELEN, HOUD HANDEN VOLLEDIG VOORDAT UDIT TOESTEL EN VOETEN NIET ONDER HET IN GEBRUIKT NEEMT. TOESTEL TIJDENS GEBRUIK. WAARSCHUWING: HAAL DE STEKKER UIT HET STOPCONTACT STOP (ACTIVITEIT) VOORDAT U HET TOESTEL REINIGT OF ONDERHOUDT. Deze veiligheidsmaatregelen zijn aan u als eigenaar van de apparatuur gericht.
Page 9
PRÉCAUTIONS MISE EN GARDE : PRENDRE MISE EN GARDE : PIÈCES MOBILES MARCHE CONNAISSANCE DU MODE ; NE PAS METTRE LES MAINS NI D’EMPLOI AVANT DE SE SERVIR LES PIEDS EN DESSOUS DE ARRÊT DE L’APPAREIL. L’APPAREIL LORSQU’EN FONCTIONNEMENT. MISE EN GARDE : DÉBRANCHER L’APPAREIL DU SECTEUR AVANT ARRÊT (DE L’ACTIVITÉ) TOUTE PROCÉDURE DE...
Page 10
PRECAUZIONI ATTENZIONE: PRIMA DI UTILIZ- ATTENZIONE: PRESENZA DI PARTI ZARE LA MACCHINA LEGGERE IL IN MOVIMENTO, TENERE MANI MANUALE DI ISTRUZIONI. E PIEDI LONTANI DALLA PARTE INFERIORE DELLA MACCHINA MENTRE QUESTA È IN FUNZIONE. ATTENZIONE: PRIMA DI EFFETTUARE LA PULIZIA O INTERVENTI DI ARRESTO (DELL’ATTIVITÀ) MANUTENZIONE, TOGLIERE TENSIONE ALLA MACCHINA.
Page 11
PRECAUÇÕES CUIDADO: LEIA POR COMPLETO CUIDADO: PARTES MÓVEIS, LIGA O MANUAL DO PROPRIETÁRIO MANTENHA AS MÃOS E OS PÉS ANTES DE OPERAR ESTA AFASTADOS DA PARTE SOB A DESLIGA MÁQUINA. MÁQUINA DURANTE A OPERAÇÃO. CUIDADO: ANTES DA LIMPEZA OU MANUTENÇÃO, DESCONECTE A PARADA (DA ATIVIDADE) ALIMENTAÇÃO.
Page 12
PRECAUCIONES CUIDADO: LEA COMPLETAMENTE CUIDADO: CUENTA CON PARTES ENCENDIDA EL MANUAL DEL PROPIETARIO MÓVILES, AL OPERARLA ANTES DE OPERAR ESTA MANTENGA LAS MANOS Y PIES APAGADA MÁQUINA. ALEJADOS DE DEBAJO DE LA MÁQUINA. CUIDADO: ANTES DE LIMPIAR O DAR SERVICIO, DESCONECTE EL DETENER (EL FUNCIONAMIENTO) SUMINISTRO DE ENERGÍA.
Page 13
FÖRSIKTIGHETSÅTGÄRDER VARNING: LÄS HELA VARNING: DET FINNS RÖRLIGA PÅ ÄGARHANDBOKEN INNAN DU DELAR. HA INTE HÄNDER ELLER ANVÄNDER DEN HÄR MASKINEN. FÖTTER UNDER MASKINEN NÄR DEN ANVÄNDS. VARNING: kOPPLA UR ELKABELN FÖRE RENGÖRING OCH STOPPA (AKTIVITETEN) UNDERHÅLL. Dessa säkerhetsföreskrifter är riktade till dig som är ägare av utrustningen. Av säkerhetsskäl är det ditt ansvar att utbilda alla medlemmar och träningspersonal så...
Page 16
ПРАВИЛА ТЕХНИКИ БЕЗОПАСНОСТИ ВНИМАНИЕ. ПЕРЕД ВНИМАНИЕ. ДВИЖУЩИЕСЯ ВКЛ. ИСПОЛЬЗОВАНИЕМ ТРЕНАЖЕРА ЧАСТИ - УБИРАЙТЕ РУКИ И ВНИМАТЕЛЬНО ПРОЧИТАЙТЕ НОГИ ИЗ-ПОД ТРЕНАЖЕРА ПРИ ВЫКЛ. РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ. ЭКСПЛУАТАЦИИ. ВНИМАНИЕ. ПЕРЕД ОЧИСТКОЙ ИЛИ ОБСЛУЖИВАНИЕМ ОСТАНОВ (РАБОТЫ) ТРЕНАЖЕРА ОТКЛЮЧИТЕ ЕГО ОТ ИСТОЧНИКА ПИТАНИЯ. Настоящие примечания по технике безопасности предназначены для вас как для владельца тренажера. В целях безопасности...
IMPORTANT LABEL LOCATIONS READ THE OWNERS MANUAL AND FOLLOW ALL PROPER INSTRUCTIONS PRIOR TO USE. IMPROPER USE OF THIS MACHINE CAN RESULT IN SERIOUS INJURY. 1. As with all exercise equipment or programs, consult a physician prior to use and stop if you feel faint, dizzy or exhausted.
OPERATION - OPENHUB LCD CONSOLE DISPLAY MEASUREMENTS (SPM) Displays the current Steps Per Minute (LEVEL) Displays the current level (KCAL) Displays accumulated calories burned (WATTS/ METS) Alternates display of current user Watts and METS WORKOUT PROFILE Displays profile of past and upcoming speed levels relative to one another SEGMENT TIMER Below the Workout Profile area is a segment timer that counts down the time remaining in the current segment.
Page 20
CONSOLE KEY FUNCTIONS Bluetooth Device Pairing with Bluetooth Button: Pushing the button puts the console into discover mode. The console will be available for pairing for up to 60 seconds to pair with a compatible App. The button will flash while searching for pairing, and the display will show the unique console code.
Page 21
WORKOUT SELECTION KEYS AND PROGRAM DEFINITIONS Manual: Similar to Quick Start, but allows user to enter weight for more accurate Calorie measurement Auto Pilot: Increase resistance by pedaling faster, no key to press Warm up program: Seven minute program with three resistance level settings designed to properly warm up the muscles prior to a workout Page 20...
OPERATION - OPENHUB TOUCHSCREEN CONSOLES CONSOLE & HOTBAR (WHERE APPLICABLE) FUNCTIONS Enables manual operation using a default weight, SPEED and a default time limit. QUICK START Key NOTE: Default time and weight are adjustable through Maintenance Mode. Press the STOP button to enter pause mode. Workout will be suspended and a count- STOP Button down timer will begin counting down from 2 minutes.
Page 23
Incline Adjustment Allows user to increase/decrease incline (Treadmill/Treadclimber Only) Level Adjustment Allows user to increase/decrease program level (Gauntlet Only) RunTV ST20 H.I.I.T. Main Menu Workout controls, varies by unit. See the Menu Map for complete details. Build A Workout Existing Workouts Quick Start...
Page 24
SCREEN VIEWS 3.65mi 37:45 20:00 KCAL Total Distance Total Time Pace (Min/Mi) 0.15 15.0 15.0 MILES During most workouts, users can select from multiple screen view options by tapping the icons at the bottom of screen. Screens vary by unit, all screens are shown in the Service Manual. Simple Key workout stats in a large and easily readable format Progress...
Page 25
Other controls vary by unit: Fan Button Cycles the fan between three settings: High, Low and Off Bluetooth Button is grayed out if no device is connected to the console. Adjustment Allows user to increase/decrease speed, level or incline depending on unit. Buttons This button has the same function as pressing stop button on hot bar, puts Exit/Back...
Page 26
& muscular power. The Star Trac TWENTY curriculum was created specifically to allow exercisers of all fitness levels to reap the benefits of interval training, in a time efficient manner, with a varied approach to keep it fun and engaging! ...
Page 27
PROGRAM UPLOAD Prior to starting a workout, a BlueTooth connected device can be used to upload a program to display on the console from a compatible app. The upload may contain user info such as age and weight. RunTV 1. In an App interface, select the option to Upload Program to ST20 H.I.I.T.
Page 28
3. Once the program has loaded, press the green start button to RunTV progress to the setup screen. ST20 NOTE: Console will return to H.I.I.T. home screen after 30 seconds or if Build A cancel is pressed. Workout 4. If program fails to load, an error Existing Workouts screen is displayed for 5 seconds...
MAINTENANCE TOOLS Working on this product will require basic and/or sometimes specialty tools based on the type of service that will be performed at any time. To assist, we recommend having the tools listed (Fig. 7) available when performing maintenance. Tool Multi-meter Screwdriver Set, Phillips...
Page 30
With durable, high performance components, this equipment is designed for heavy usage with minimal maintenance required. To keep it in top condition, perform regular daily, weekly and monthly preventive maintenance routines outlined below. The safety and integrity of this machine can only be maintained when the equipment is regularly examined for damage and wear and repaired.
Page 31
MAINTENANCE MODE - LCD Maintenance Mode allows access to service and diagnostic information, as well as provides the ability to adjust certain program default parameters. To enter Maintenance Mode: 1. Press and hold the keys together. 2. A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window. 3.
Page 32
Default Weight (to user). Typical weight in lb 1 (lb) 500 (lb) 155 (lb) (UNx = UNE) or kg (UNx = UNM). 1 (kg) 226 (kg) 70 (kg) Language. Display language; either LEN (English), LGE (German), LSP (Spanish), LDU LANG (Dutch), LPO (Portuguese), LFR (French), LIT (Italian), LSW (Swedish), LKA (Katakana) or RUS (Russian).
Page 33
Random Program. Number of times the RNDM PROG Random program was run since last reset. Interval Watts Program. Number of times IW PROG the Interval Watts program was run since last reset. Continuous Watts Program. Number of CW PROG times the Continuous Watts program was run since last reset.
Page 34
REGULATORY INFORMATION This section provides regulatory and safety information CSA C22.2 No 0-M91 General Requirements • pertaining to the product CSA C22.2 No. 68-92 Motor Operated Appliances • FCC AND OTHER DOMESTIC REGULATIONS EUROPEAN APPLICATIONS This product has been tested and found to comply This product has been tested to the following with the limits for a Class A digital device, pursuant to standards:...
SUPPORT & SERVICE CORE Get world class support for all brands with our new support portal, Core Connect. Get help with your general inquiries, warranty registration, preventative maintenance, service requests and parts orders. You can CONNECT also make seamless service requests, get real time updates, manage your assets and intuitively order parts for all brands direct from the site.
Need help?
Do you have a question about the 8-CT and is the answer not in the manual?
Questions and answers
how to remove the shrowd
To remove the shroud on a Star Trac 8-CT:
1. Remove the motor shroud carefully without modifying the equipment.
2. Save any screws removed for reassembly.
3. If removing the PVS (Personal Viewing Screen) shroud, use a #2 Phillips screwdriver to remove the eight (8) screws securing the PVS rear shroud, then remove the PVS shroud.
Always disconnect all power before performing maintenance or cleaning.
This answer is automatically generated