Structure Of Programming Mode - Card/Coin Type - LG GCWP1069CS1 Owner's Manual

22
PROGRAMMING MODE
Structure of Programming mode – Card / Coin type
Algorithm flow chart shows how to control the programming mode.
Before program set, check the structure of the programming mode.
1. Turn on/off toggle switch or insert service card, for entering setup mode (or follow OPL type instructions).
2. Press Hot button to move to the upper level.
3. Press Warm (+) or Cold (-) button if you want to be at the same level.
4. Press Start button to enter the details of Setup or Diagnostic Tests.
is to set price value, time value, vend type, etc.
consists of line test, reset, free cycle, and kill cycle.
is to collect the usage data.
NOTE
• Do not use
• It is used only in inspecting the machine.
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is USA)
, .
mode (Refer How to enter the
)