How To Change Add Super Wash Price - LG GCWP1069CS1 Owner's Manual

32
PROGRAMMING MODE - SETUP MODE

9. How to change add super wash price

Enter setup mode.
You will see LqC1
NOTE
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is USA)
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous add super wash price.
Press Warm(+) or Cold(-) button to set add super wash
price. (The vend price can be set from 0.00 to 9.95 in
0.05 increments.)
Press the Start button.
The machine sets up the add super wash price, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
mode (Refer How to enter the
Button Display
appears
appears
)