Operation - Makita M5801 Instruction Manual

3
2
1
► 1. Hex bolt 2. Outer flange 3. Saw blade 4. Inner flange
To install the blade, follow the removal procedure in
reverse. BE SURE TO TIGHTEN THE HEX BOLT
CLOCKWISE SECURELY.
For tool with the inner flange for a
15.88 mm hole-diameter saw blade
1 2
► 1. Mounting shaft 2. Inner flange 3. Saw blade
4. Outer flange 5. Hex bolt
Mount the inner flange with its recessed side facing
outward onto the mounting shaft and then place saw
blade, outer flange and hex bolt.
BE SURE TO TIGHTEN THE HEX BOLT CLOCKWISE
SECURELY.
For tool with the inner flange for a other
than 15.88 mm hole-diameter saw blade
1 2
► 1. Mounting shaft 2. Inner flange 3. Saw blade
4. Outer flange 5. Hex bolt
4
5
4
3
5
4
3
7 ENGLISH
The inner flange has a certain diameter protrusion on one
side of it and a different diameter protrusion on the other side.
Choose a correct side on which protrusion fits into the saw blade
hole perfectly. Next, mount the inner flange onto the mounting
shaft so that the correct side of protrusion on the inner flange
faces outward and then place saw blade and outer flange. BE
SURE TO TIGHTEN THE HEX BOLT CLOCKWISE SECURELY.
CAUTION:
• Make sure that the protrusion "a" on the inner
flange that is positioned outside fits into the saw
blade hole "a" perfectly. Mounting the blade on the
wrong side can result in the dangerous vibration.
Hex wrench storage
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.

OPERATION

CAUTION:
• Be sure to move the tool forward in a straight
line gently. Forcing or twisting the tool will result
in overheating the motor and dangerous kick-
back, possibly causing severe injury.
Hold the tool firmly. Set the base plate on the workpiece
to be cut without the blade making any contact. Then
turn the tool on and wait until the blade attains full speed.
Now simply move the tool forward over the workpiece
surface, keeping it flat and advancing slowly until the
sawing is completed. To get clear cuts, keep your sawing
line straight and your speed of advancing uniform.