Shortcuts Function - Philips CT0292RED/00 Manual

Release the protective rubber cap by pulling it
outwards and plug in the charger connector as shown
below. Then plug the other end into a mains AC
power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage the
battery.
The only way to turn off the charger is to unplug it, so use
an easily accessible AC power socket.If the mobile
phone automatically shuts down, or indicates
low, you should immediately charge the battery. If the
battery power has not been entirely used up before
recharging, the recharging
automatically reduced.
6
Battery is
duration will be

Shortcuts function

Your phone provides 10 quick access to the functions
on your phone. You can modify the shortcuts
according to your needs. For more information, see
"Shortcuts" on page 44.
Getting Started