Table of Contents
Advertisement
If you enter an incorrect PIN code three times in
succession, your SIM card will be locked. To unlock it, you
must obtain the PUK code from your network operator.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low. Once you have
installed the battery, you can start charging the phone.
Plug in the charger connector as shown below. Then
plug the other end into a mains AC power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time and stand-by time can go up to 8 hours and 1
month respectively.
Keeping the charger plugged to the mobile phone when
the battery is fully charged will not damage the battery.
8
The only way to turn off the charger is to unplug it, so use
an easily accessible AC power socket. You can connect
the charger to an IT supply.
Insert a micro-SD card
Your phone supports 2GB micro SD card.
1. Gently slip the micro-SD card into the micro SD
card slot, with the gold contacts facing upwards.
2. Press the micro-SD card down until the card
locks into place.
Shortcuts function
Your phone provides 10 quick access to the functions
on your phone. You can modify the shortcuts
according to your needs. For more information, see
"Shortcuts" on page 35.
Getting Started
Advertisement
Table of Contents
