Switch On The Phone; Charge The Battery - Philips CT0292RED/00 Manual

Place the battery back into its slot, with the gold
contacts of the battery facing the corresponding gold
contacts on the side of the phone. The gold contacts
on the phone are positioned on the right hand side of
the phone, besides the SIM card slot.
In
sert a memory card
Ensure your phone is turned off first in order to
prevent accidental static discharge from the battery
corrupting your card memory.
Gently slip the card into the memory card slot with
golden contact facing downwards until the card locks
into its place.
Getting Started

Switch on the phone

To switch on the phone, long press ) key. Enter the
PIN code if required. The PIN code is a 4- to 8-digit
secret code of your SIM card. It is preconfigured and
communicated to you by your network operator or
retailer. For more information on PIN codes, see
"Security Setup" on page 29.
If you enter an incorrect PIN code three times in
succession, your SIM card will be locked. To unlock it, you
must obtain the PUK code from your network operator.

Charge the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low. Once you
have installed the battery, you can start charging the
phone.
5