Table of Contents
Advertisement
Replace the back cover by sliding down into its slots
until it stops.
Switch on the phone
To switch on the phone, long-press
PIN code if required. A PIN code is a 4- to 8-digit
secret code for your SIM card. It is preconfigured and
communicated to you by your operator or retailer. For
more information on PIN codes, see "Security Setup"
on page 27.
If you enter an incorrect PIN code three times, your
SIM card will be locked. To unlock it, you must
request the PUK code from your operator.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low.
Once the battery is back in place you can charge the
phone. Plug in the connector as shown below. Then
plug the other end into a main AC power socket.
Getting Started
key. Enter the
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Keeping the charger plugged to the mobile when the
battery is fully charged will not damage the battery.
The only way to turn off the charger is to unplug it,
so use an easily accessible AC power socket.
Shortcuts function
Your phone provides ten fast ingoing function items.
You can modify them according to demands. For
more info see "Shortcuts" on page 43.
5
Advertisement
Table of Contents
