Adjusting Temperature In A Refrigerator Compartment; Cooling Food Quickly (Quick Cooling) - Hitachi R-SF62EMJ How To Use Manual

Adjusting temperature in a refrigerator compartment

1
Push button to set the temperature as you like.
Each time you Push the button, the corresponding indicator lamp changes in the order shown below:
The temperature is set to "中 (MID) " before shipping.
About 2 〜 6˚C
※ The above temperatures are standard values in the Refrigerator Compartment under the condition that the refrigerator is stable with no
food stored and the door closed, at ambient temperatures of 30ºC.
● Select " 中 (MID)" in ordinary usage. The temperature may change depending on the operation states.
● If you adjust the temperature more finely.
Notice
● The temperatures of the Vacuum Compartment also change if selecting "強 (MAX) " or "弱 (MIN) " .
● Temperature of the door pocket is set slightly higher than the one in the left table.

Cooling food Quickly (Quick Cooling)

Place the foods in the Quick Cooling Corner.
1
The food cools more quickly if it is placed at the center part near the interior wall. (the front
of the Cold Air Blowout Port)
Caution
● Don ' t place any juicy food near the Cold Air Blowout Port, as it may be frozen.
● Please avoid placing any carbonated can beverage near the Cold air blow out port as it
may be frozen or explode.
2
button to turn on " 急冷藏 (Quick Cooling) "
Push
indicator lamp.
" Quick Cool " indicator lamp is turned on during the " Quick Cool " operation, and other lamps will be
turned off in about 40 seconds.
The operation will end automatically in about 50 minutes and "急冷藏 (Quick
Cooling) " indicator lamp will turn off.
button to turn off " 急冷藏 (Quick Cooling) " indicator lamp.
Push
About 1 〜 3˚C lower About 1 〜 3˚C higher
than " 中 (MID)" than " 中 (MID)"
Pg.54
Quick Cooling corner
Push it
Push it
45