Reading the owner’s manual thoroughly will help avoid any personal injury or damage to your machine. By knowing how best to operate this machine you will be better positioned to show others who may Product Identification Numbers also operate the unit.
SAFETY SAFETY Save these Instructions WARNING Safety Rules Running engine gives off carbon monoxide, an odor- less, colorless, poison gas. This is the safety alert symbol. It is used to alert Breathing carbon monoxide can cause headaches, you to potential personal injury hazards. Obey fatigue, dizziness, vomiting, confusion, seizures, nau- all safety messages that follow this symbol to sea, fainting or death.
Page 5
• Never operate water pump without protective housing or covers. • DO NOT wear loose clothing or anything that may be caught in the starter or other rotating parts. • Tie up long hair and remove jewelry.
• If you have questions about intended use, ask dealer or contact nearest authorized dealer. • Be sure pump chamber is filled with water before starting the engine. Never run pump without priming. • Use a non-collapseable hose on the suction side of the hose.
ASSEMBLY ASSEMBLY Your water pump requires some set up and is ready for use after it has Connect Suction Hose (Mandatory) been properly serviced with the recommended oil and fuel. Attach Suction Hose by connecting camlocks. Attach Suction Hose to Strainer Basket Connect Discharge Hose (Optional) 1.
OPERATION OPERATION What is “Head”? Head refers to the height of a column of water that can be delivered by the discharge of the pump. Suction Head is the vertical distance between the center of the pump and the surface of the liquid on the suction side of the pump. May also...
2. Make sure unit is on a flat, level surface and pump chamber is primed. 3. Turn fuel valve (1) to “On” position. The fuel valve handle will be vertical (pointing toward the ground). 4. Push on/off switch (2) to “On” position.
STARTING THE WATER PUMP STOPPING THE WATER PUMP IMPORTANT: If excessive fuel is present in the air/fuel mixture Stopping the Water Pump 1. Move engine speed lever to “Slow” position. causing a “flooded” condition, move choke lever to “Run” position 2.
Page 11
If you need assistance with the assembly or operation of your Water Pump please call...
Need help?
Do you have a question about the Wildland WS1525SKID and is the answer not in the manual?
Questions and answers