Install The Handset; Check The Battery Level; Set The Country; Set The Date And Time - Philips SE5653B/05 User Manual

Install the handset

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
•
Charge the batteries for 24 hours before first use.
Warning
•
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
a The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
b Place the handset on the base station to
power up.
Note
•
If the handset becomes warm when the
batteries are being charged, it is normal.

Check the battery level

The battery icon displays the current battery
level.
The battery is full, the talk time
can go up to 14 hours.
The battery is empty. Charge it.
The handsets turn off if the battery is empty. If
you are on the phone, you hear warning tones
when the battery is almost empty. The call gets
disconnected after the warning.

Set the country

To make the phone work, select your country.
1
When you see the welcome message,
select your country, press [SELECT] to
confirm.
The country setting is saved.
»
2

Set the date and time.

» The phone is now ready to use.
To set the date and time later, press
»
[BACK] to skip this setting.
Set the date and time
1
Press menu.
2
Select [CLOCK & ALARM] > [SET
DATE/TIME], then press [SELECT] to
confirm.
EN
13