Outgoing messages (OGM)
The outgoing message is the message your
caller hears when the answering machine picks
up the call. The answering machine has 2 pre-
recorded outgoing messages: the [ANSWER &
REC.] mode and [ANSWER ONLY] mode.
Record an outgoing message
The maximum length of the outgoing message
you can record is 3 minutes. The newly
recorded outgoing message automatically
replaces the old one.
1
Press menu.
2
Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to confirm.
3
Select [ANSWER & REC.] or [ANSWER
ONLY], then press [SELECT] to confirm.
4
Select [RECORD OGM], then press
[SELECT] to confirm.
5
Recording starts after the beep.
6
Press [OK] to stop recording or the
recording stops after 3 minutes.
The recorded outgoing message plays
»
back automatically for your review.
Note
•
To restore the pre-recorded outgoing message,
delete your current outgoing message.
Listen to the current outgoing
message
1
Press menu.
2
Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to confirm.
3
Select [ANSWER & REC.] or [ANSWER
ONLY]. Press [SELECT] to confirm.
4
Select [PLAY], then press [SELECT] to
confirm.
The handset plays the current outgoing
»
message.
Delete an outgoing message
1
Press menu.
2
Select [ANSWER MACHINE]
>[RECORD OGM], then press
[SELECT] to confirm.
3
Select [ANSWER & REC.] or [ANSWER
ONLY], then press [SELECT] to confirm.
4
Select [DELETE], then press [SELECT]
to confirm.
5
The pre-recorded outgoing message is
restored.
Note
•
No pre-recorded outgoing message can be
deleted.
Incoming messages (ICM)
Each message can be up to 3 minutes long. When
you receive new messages, the new message
indicator flashes on the answering machine and
the handset displays a notification message.
Note
•
If you pick up the phone when the caller leaves
a message, the recording stops and you can
talk to the caller directly.
Note
•
If the memory is full, the answering machine
switches to [ANSWER ONLY] automatically.
Delete old messages to receive new ones.
Listen to the incoming messages
Incoming messages are played back in the
sequence they are recorded.
From the base
•
Start/Stop playback: Press
•
Adjust the volume: Press
.
/
.
EN
33