Remote Access - Philips CD5651B/51 User Manual

From the handset
1
Press during message playback to
enter the options menu.
2
Select [DELETE], then press [SELECT]
to confirm.
The current message is deleted.
»
Delete all old incoming messages
From the base
1
Press and hold
» All old messages are permanently
deleted.
From the handset
1
Press menu on the handset.
2
Select [ANSWER MACHINE] >
[DELETE ALL], then press [SELECT] to
confirm.
» The handset displays a confirmation
request.
3
Press [OK] to confirm.
All old messages are permanently
»
deleted.
Note
•
You can delete the read messages only. No
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
EN
36
in standby mode.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [RING DELAY], then
press [SELECT] to confirm.
3
Select a new setting, then press
[SELECT] to confirm.
» The setting is saved.
Note
•
Ensure that the answering machine is switched
on before this feature can be applied.
Tip
•
When you access the answering machine
remotely, you are recommended to set the
ring delay to [ECONOMY] mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.

Remote access

You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
•
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press menu.