First Ring; Eco Mode - Philips SE1701B/51 User Manual

Tip
•
The carrier code contains 2 or 3 digits.
For more information, contact the service
provider.
Activate the carrier code
1
Press MENU.
2
Select [ADVANCED SET] > [CARRIER
CODE], then press OK.
3
Enter the carrier code, then press OK to
confirm.
The setting is saved.
»
Deactivate the carrier code
1
Press MENU.
2
Select [ADVANCED SET] > [CARRIER
CODE], then press OK.
3
To delete all digits, press BACK, then
press OK to confirm.
The setting is saved.
»

First ring

If you have subscribed for caller ID service with
your service provider, your phone can suppress
the first ring before the caller ID displays on
the screen. After the phone is reset, it can
detect automatically if the caller ID service
is subscribed and start to suppress the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Press MENU.
2
Select [ADVANCED SET] > [FIRST
RING], then press OK to confirm.
3
Select [ON]/[OFF], press OK to confirm.
The setting is saved.
»
EN
26
Note
•
To reset the first ring status, go to the reset
menu.

ECO mode

The ECO mode reduces the transmission
power of the handset and base station.
1
Press MENU.
2
Select [ADVANCED SET] > [ECO], then
press OK to confirm.
3
Select [ON]/[OFF], then press OK to
confirm.
The setting is saved.
»
» ECO is displayed.
Note
•
ECO is activated, the connection range
When
between the handset and the base station can
be reduced.