Table of Contents
Advertisement
WAP (depending on model)
All of the information to be entered in the
settings is supplied by your operator or
service provider.
myX-1a twin PCS_en_11WAP.pmd
Configuration of parameters
Advanced... menu: access to sub-menus:
• Connection settings which allow you to set the
parameters for several access providers (depending
on model). The current access service has a star in
front of it.
Configuration of WAP parameter
- Select the desired access service using the scrolling
arrows then press on Modify (lefthand key ).
- Enter the name of the service then validate.
- Enter the internet address of the home page then
validate.
- Enter the connection settings.
- Press on Details (lefthand key ).
a user name,
a password,
the IP address of the WAP gateway: enter the IP
number using the central key (Next) then choose
Secure or Non secure.
the call number,
the access mode (digital or analog).
Once all the parameters are entered, you can
activate the selected service.
- Confirm your choice with OK.
71
71
23/06/2004, 10:50
Advertisement
Table of Contents
