Register the handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
Auto registration
Place the unregistered handset on the base
station.
»
The handset detects the base station
and start to register automatically.
Registration is completed in less than 2
»
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Press MENU/OK on the handset.
2
Select [SERVICES] > [REGISTER], then
press MENU/OK to confirm.
3
Press and hold
seconds.
4
Enter the system PIN. Press REDIAL/C
to make corrections.
5
Press MENU/OK to confirm the PIN.
»
Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found
within a certain period, your handset displays
a notification message. Repeat the above
procedure if registration fails.
Note
•
The preset PIN is 0000. No change can be
made on it.
EN
22
on the base station for 5
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Press MENU/OK.
3
Select [SERVICES] > [UNREGISTER],
then press MENU/OK to confirm.
4
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
5
Select the handset number to be
unregistered.
6
Press MENU/OK to confirm.
The handset is unregistered.
»
Tip
•
The handset number displays beside the
handset name in standby mode.
Restore default settings
You can reset your phone settings to the
original factory settings.
1
Press MENU/OK.
2
Select [SERVICES] > [RESET], then press
MENU/OK to confirm.
»
The handset displays a confirmation
request.
3
Press MENU/OK to confirm.
All settings are reset.
»
The welcome screen displays.
»
Tip
•
For more information about the default
settings, see the section on Default settings.