Philips VOIP8551B/05 Manual page 46

2
Select
Settings
. Press
Recall time
3
Select the new setting. Press
• The setting is saved.
13.4.7.1 Setting the recall pause
time
There are 2 recall pause time options:
Pause 1 and Pause 2.
1
Press .
Menu
2
Select
Settings
Recall Pause Time
3
Select the new setting. Press
• The setting is saved.
13.4.8 Dial mode
This feature only applies to model(s) that
support both tone and pulse dialing.
Dial mode is the telephone signal used in
your country. Your phone supports tone
(DTMF) and pulse (rotary) dialing. Your
phone shall already be set up for use in
your country. For details, consult your
service provider.
13.4.9 Setting the dial mode
1
Press .
Menu
2
Select
Settings
. Press
mode
3
Select the new setting. Press
• The setting is saved.
Tip
. If your phone is in pulse
Temporary Tone
*
dialing, press
temporary tone mode. '*' displays. Digits
entered after '*' are sent out as tone
signals (for this call only).
Calling Features
> >
Regular Call
.
Select
OK
> >
Regular Call
. Press .
OK
OK
> >
Regular Call
.
Select
Select
during a call for
13.4.10 Pause selection
This feature only applies to model(s) with
.
pause selection support.
A pause is a break you can enter when
making a call. A pause is used for calls
such as PABX and operator services. For
details, consult your service provider.
13.4.10.1 Activating PABX
1
Press
2
Select
PABX
.
3
Select the new setting. Press
• The setting is saved.
13.4.11 First Ring
This feature only applies to model(s) with
first ring support.
If you have subscribed for Caller ID
service with your service provider, your
phone can suppress the first ring before
the Caller ID. After resetting, your phone
will automatically detect if Caller ID
service is subscribed and start to
suppress the first ring. You can change
this setting to suit your preference.
Dial
13.4.12 Turning first ring on/off
1
Press
.
2
Select
ring
3
Select the new setting. Press
• The setting is saved.
Note
Reset First Ring Status.
ring status, you can reset the system from
the Reset menu. See "Reset the default
settings" on page 50.
.
Menu
>
Settings Regular Call
. Press .
OK
.
Menu
>
Settings Regular Call
. Press .
Select
To reset the first
>
.
OK
>
1st
.
OK
43