Discharge Hose Installation - Honda WH20 Owner's Manual

OPERATION

DISCHARGE HOSE INSTALLATION

Use a commercially available hose and hose connector. The hose clamp is
provided with the pump.
1. Verify that the hose coupling packing is in good condition.
2. Securely tighten the hose connector to the pump discharge port.
3. Install the discharge hose to the hose connector.
Use a hose clamp to securely fasten the discharge hose to prevent the
discharge hose from disconnecting from the hose connector under high
pressure.
It is best to use a short, large-diameter hose, because that will reduce fluid
friction and improve pump output. A long or small-diameter hose will increase
fluid friction and reduce pump output.
HOSE CLAMP
DISCHARGE HOSE
(Commercially available)
20
HOSE COUPLING PACKING
HOSE COUPLER
HOSE CLAMP RING
HOSE CONNECTOR
(Commercially available)
DISCHARGE PORT