Replacing The Oven Light; Oven Door: Remove And Re-Install - Samsung NX58 663 Series User Manual

Hide thumbs Also See for NX58 663 Series:
Table of Contents

Advertisement

Available languages

Available languages

Replacing the Oven Light

The oven light is a standard 40-watt appliance bulb. It comes on when you open
the oven door.
CAUTION
To prevent electric shock, make sure the oven is turned off and cool before
replacing the oven light.
NOTE
The oven light does not operate during the self-cleaning cycle.
Remove the racks if they prevent you from accessing the oven light.
NX5000M_NX58M6650WS_AA_DG68-00993A-04_EN+MES+CFR.indb 41
Turn off the oven.
1.
2.
Make sure the oven and oven light are
cool.
3.
Open the door, and remove the glass
cover by turning it counterclockwise.
4.
Remove the oven light from the socket
by turning it counterclockwise.
Insert a new 40-watt appliance bulb
5.
into the socket, and then turn it
clockwise to tighten.
6.
Reinsert the glass cover, and then turn
it clockwise to tighten.

Oven Door: Remove and Re-Install

To remove the oven door
Hinge lock
Locked position
1.
Turn off the oven.
2.
Fully open the oven door.
3.
Pull the hinge locks away from the oven body and down toward the door
frame into the unlocked position.
4.
1
5.
2
6.
WARNING
The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
Take care when moving the oven door. Improper handling could result in
physical injury.
To prevent electric shock, make sure the oven is turned off before removing
the oven door.
Unlocked position
Close the door to 5 degrees from
vertical. This is the removal position.
While holding both sides of the oven
door tightly, lift it up and out until the
hinge arms come clear of the slots at
the bottom of the oven door.
Place the door in a safe location.
English 41
2018-12-18
6:57:26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx58 665 seriesNx58r6631sgNx58r6631ss

Table of Contents