Stopping The Engine - ABB HT608046 Operation Manual

Operation Manual / A130-H.. - A140-H..
6 Operation and service / 6.4 Stopping the engine
6.4

Stopping the engine

CAUTION
Residual heat in the turbocharger
If the residual heat in the turbocharger is not adequately dissipated, it may
damage the engine.
Adequate cooling of the turbocharger must be ensured after stopping
u
the engine.
Water-cooled turbocharger variant
Post-lubricate as long as the rotor is turning.
u
Observe the oil pressure while performing post-lubrication: 0.5 < p
u
Switch off post-lubrication as soon as the rotor is stationary or after no more than two
u
minutes.
Deviating procedures must be coordinated with ABB Turbocharging.
© Copyright 2021 ABB. All rights reserved. HZTL4030_EN
≤1.0.
oil
Rev.G July 2021