Weights Of Individual Parts; Fig. 32: Swivel Lifting Eyes; Fig. 33: Starpoint Ring Nut Vrm; Table 32: Swivel Lifting Eyes - ABB HT608046 Operation Manual

Operation Manual / A130-H.. - A140-H..
9 Dismantling and fitting / 9.2 Weights of individual parts
¡
Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. As-
sembly devices are specially constructed and designed for the defined use; they are not
commercially available products. Use assembly devices only for the described applica-
tions.
¡
Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting
gear is not supplied by ABB.
Swivel lifting eyes to be used
Swivel lifting eyes are required for the safe lifting of loads, which are not supplied by ABB.
Fig. 32: Swivel lifting eyes
Product Thread M
A130 M10
A135 M10
A140 M12
Table 32: Swivel lifting eyes
Ring nuts to be used
Two ring nuts (M16) are required for safer lifting of the cartridge group, which are not in-
cluded in the ABB scope of delivery.
Fig. 33: Starpoint ring nut VRM
9.2

Weights of individual parts

The specified weights of the individual parts or assemblies are rounded-up standard values.
© Copyright 2021 ABB. All rights reserved.
Length L [mm]
17 mm
17 mm
21 mm
HZTL4030_EN
Minimum load limit [kg]
100 kg
150 kg
250 kg
Rev.G
Quantity
2
2
2
July 2021