Parts List; Maintenance - Central Pneumatic 47868 Assembly And Operating Instructions Manual

Chisels (17): Cut Chisel, Removal Tool, Weld Buster, Tapered Punch, Ripping Chisel,
Bushing Splitter, Weld Rivet Cutter, Panel Cutter, Long Blade Cutter
Warning!! Always disconnect from the air source before having maintenance performed.
1. After each use, wipe the Air Chisel down with a lint free cloth.
2. Make sure there are no concrete chips, dirt, or debris in the Spring (#16).
3. Before storage, add a small quantity of high quality pneumatic oil in the Air Inlet (#7) and
operate the tool for a couple of seconds to lubricate and protect the internal mechanism.
4. Examine your chisels before using them. If a chisel is dull or cracked do not use it. Re-
place worn or broken chisels with approved replacement chisels from Harbor Freight Tools.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DIS-
TRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER
THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANU-
FACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 47868

Parts List

Part No. Description
1 Housing
2 Stopple
3 Pin
4 Bushing
5 Ball
6 Spring
7 Air Inlet
8 Trigger
9 Pin
10 0-ring
11 Regulator
12 Pin
13 Cylinder
14 Plunger
15 Valve
16 Spring
17 9 Piece Chisel Set

Maintenance

PLEASE READ THE FOLLOWING CAREFULLY
Page 7
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
07g