Chapter 3. PC software (Multiple Display Control)
8
Select the
All
menu to check that the device has been registered.
9
When the device is approved by the server, the schedule registered in the
selected group will be downloaded to the device. The schedule will run after it is
downloaded.
• For further details on how to configure a schedule, refer to the "MagicInfo Server
user's manual".
• If a device is deleted from the list of devices approved by the server, the device
will reboot to reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's
current time.
1
Go to the tabs
Device
→ Time.
2
Select your device.
3
Select
Clock
Set, and sync the time with the server.
‒ When connecting to the server for the first time, the time on the product is set
using the GMT time of the region where the server is installed.
‒ The time on the product can be changed from the server.
‒ Turning the product off and then on again will restore the time setting on the
product to the last time that was set from the server.
• For further details on how to manage the time (scheduling, holiday
management, etc.), refer to the "MagicInfo Server user's manual".
43