Replaccement Of A Light Source Lamp - JVC LX-D1000 User Manual

Hide thumbs Also See for LX-D1000:
Table of Contents

Advertisement

Replacement of a light source lamp
The light source lamp is designed to project the image
on the LCD panels. When the light source lamp no
longer functions, replace it with a new one to ensure
optimum performance.
Caution:
• Do not remove the light source lamp from inside of
this equipment immediately after using the projec-
tor, you may get burned because of the high tem-
perature of the light source lamp.
• When you replace the light source lamp, press the
power button to power off, then wait for 120 sec-
onds in stand-by mode to cool down the lamp and
LCD panels. Turn off the main switch, unplug the
power cord from the outlet and wait one hour so that
the lamp is cooled to the touch.
• Do not remove the light source lamp except for re-
placement. Careless treatment can cause injury or
fire.
• Do not touch the lamp element directly. Oil residue
on your hands could cause it to break and cause in-
jury.
• Be sure not to drop the lamp lid screw into the pro-
jector. Also be sure not to insert metal or any flam-
mable objects, it may cause fire or an electric shock.
If any objects are inserted, please unplug and con-
tact your dealer.
• Install the lamp securely, failure may cause a fire.
1. Stand the projector as
shown in the direction of the
arrow.
2. Loosen the screws of the
lamp lid on the top cover us-
ing a phillips screwdriver
(+) , and remove the lid.
• Remove the lamp cover in
the direction of the arrow
as indicated.
3. Loosen screws (a) of fixing metal using a phillips
screwdriver (+).
32
Screw of the lamp lid
(a)
4. Hold onto the projector by the handle as you pull
out the lamp.
Once the lamp has been removed, do not spill liquid
on it, place it near flammable objects or where chil-
dren can touch it. Otherwise, it will cause injury or
fire.
5. Insert the new lamp securely into the projector body
in the right direction.
6. Tighten up the screws (a) to hold the piece in place.
7. Tighten up the screws of the lamp lid using a
phillips screwdriver (+).
(a)

Advertisement

Table of Contents
loading

Table of Contents